Terms Of Use

Effective Date: This Terms of Use Agreement was last updated on 12/28/2011.

This Terms of Use Agreement sets forth the standards of use of the Empire Metal Supply, Inc. Online Service. By using the www.proquestsecurity.com website you (the “Individual”) agree to these terms and conditions. If you do not agree to the terms and conditions of this agreement, you should immediately cease all usage of this website. We reserve the right, at any time, to modify, alter, or update the terms and conditions of this agreement without prior notice. Modifications shall become effective immediately upon being posted at www.empiremetalsupply..com . Your continued use of this Website after amendments are posted constitutes an acknowledgement and acceptance of the Agreement and its modifications. Except as provided in this paragraph, this Agreement may not be amended.

Disclaimer of Warranties.

The site is provided by Empire Metal Supply, Inc. on an “as is” and on an “as available” basis. To the fullest extent permitted by applicable law, Empire Metal Supply, Inc. makes no representations or warranties of any kind, express or implied, regarding the use or the results of this web site in terms of its correctness, accuracy, reliability, or otherwise. Empire Metal Supply, Inc. shall have no liability for any interruptions in the use of this Website. Empire Metal Supply, Inc. disclaims all warranties with regard to the information provided, including the implied warranties of merchantability and fitness for a particular purpose, and non-infringement. Some jurisdictions do not allow the exclusion of implied warranties, therefore the above-referenced exclusion is inapplicable.

Limitation of Liability

EMPIRE METAL SUPPLY, INC. SHALL NOT BE LIABLE FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR Empire Metal Supply, Inc. SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, OR DAMAGES FOR LOST PROFITS, LOSS OF REVENUE, OR LOSS OF USE, ARISING OUT OF OR RELATED TO THIS WEB SITE OR THE INFORMATION CONTAINED IN IT, WHETHER SUCH DAMAGES ARISE IN CONTRACT, NEGLIGENCE, TORT, UNDER STATUTE, IN EQUITY, AT LAW, OR OTHERWISE, EVEN IF EMPIRE METAL SUPPLY, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW FOR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, THEREFORE SOME OF THE ABOVE LIMITATIONS IS INAPPLICABLE.

Indemnification

Individual agrees to indemnify and hold Empire Metal Supply, Inc., its parents, subsidiaries, affiliates, officers and employees, harmless from any claim or demand, including reasonable attorneys’ fees and costs, made by any third party due to or arising out of Individual’s use of this Website, the violation of this Agreement, or infringement by Individual, or other user of this Website using Individual’s computer, of any intellectual property or any other right of any person or entity.

Governing Jurisdiction of the Courts of New York

Our website is operated and provided in the State of New York. As such, we are subject to the laws of the State of New York, and such laws will govern this Terms of Use, without giving effect to any choice of law rules. We make no representation that our website or other services are appropriate, legal or available for use in other locations. Accordingly, if you choose to access our site you agree to do so subject to the internal laws of the State of New York.

Compliance with Laws.

Individual assumes all knowledge of applicable law and is responsible for compliance with any such laws. Individual may not use this Website in any way that violates applicable state, federal, or international laws, regulations or other government requirements. Individual further agrees not to transmit any material that encourages conduct that could constitute a criminal offense, give rise to civil liability or otherwise violate any applicable local, state, national, or international law or regulation.

Copyright Information

All content included or available on this site, including site design, text, graphics, interfaces, and the selection and arrangements thereof is ©2012 Empire Metal Supply, Inc., with all rights reserved, or is the property of Empire Metal Supply, Inc. and/or third parties protected by intellectual property rights. Any use of materials on the website, including reproduction for purposes other than those noted above, modification, distribution, or replication, any form of data extraction or data mining, or other commercial exploitation of any kind, without prior written permission of an authorized officer of Empire Metal Supply, Inc..

Notification of Claimed Copyright Infringement

Pursuant to Section 512(c) of the Copyright Revision Act, as enacted through the Digital Millennium Copyright Act, Empire Metal Supply, Inc. designates the following individual as its agent for receipt of notifications of claimed copyright infringement.

By Mail
Empire Metal Supply, Inc.
175 Commerce Drive
Hauppauge, NY 11788 United States
Phone: 631.231.5000
Fax: 631.231.5191
Email: info@empiremetalsupply.com

Other Terms

If any provision of this Terms of Use Agreement shall be unlawful, void or unenforceable for any reason, the other provisions (and any partially-enforceable provision) shall not be affected thereby and shall remain valid and enforceable to the maximum possible extent. You agree that this Terms of Use Agreement and any other agreements referenced herein may be assigned by Empire Metal Supply, Inc., in our sole discretion, to a third party in the event of a merger or acquisition. This Terms of Use Agreement shall apply in addition to, and shall not be superseded by, any other written agreement between us in relation to your participation as an Individual. Individual agrees that by accepting this Terms of Use Agreement, Individual is consenting to the use and disclosure of their personally identifiable information and other practices described in our Privacy Policy Statement.

Our Services

Whether you need grinding, polishing, or saw cutting — Empire Metal Supply has you covered.

Learn More

303 Stainless Bar

Product Description

Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the chromium-nickel grades. It is non-magnetic in the annealed condition and is not hardenable by heat treatment. Tensile strength and hardness can be increased by cold working.

Specifications

ASTM A314, ASTM A320, ASTM A582, AMS 5640

Weldability

Fair

Corrosion Resistance

Maximum corrosion resistance in the annealed condition. Free machining elements reduce overall corrosion resistance.

Type 304 / 304L Stainless Bar

Product Description

Type 304 is the basic "18-8" chromium-nickel stainless steel. It combines excellent mechanical properties with remarkable resistance to many corrosive agents encountered in domestic and industrial use. It is useful where sanitation and cleanliness are important. It is non-magnetic in the annealed condition and not hardenable by heat treatment. Both hardness and tensile strength can be increased by cold working. This is an electric-furnace product manufactured to meet the exacting standards of the aircraft industry. Bars are available not only in the regular 304 analysis, but also in an extra-low-carbon analysis, known as Type 304L. The advantage of this analysis is that it precludes any harmful precipitation in the 800° F - 1500° F range, such as might otherwise occur in welding heavier sections.

Specifications

ASTM A276, ASTM A479, AMS 5639, QQ-S-763

Weldability

Excellent. L-Grade reduces intergranular corrosion at weld site Annealing after welding helps maintain maximum corrosion resistance.

Corrosion Resistance

Maximum corrosion resistance in annealed condition shows good resistance to strong oxidizing acids, such as nitric acid, and resists attack by a wide variety of organic and inorganic chemicals. Intergranular corrosion may occur if heated within or cooled through the range of 800° F - 1500° F.

309 Stainless Bar

Product Description

Type 309 is an austenitic chromium-nickel modification of Type 304 with superior heat-resisting characteristics. It offers slightly better corrosion resistance than Type 304 because of the higher percentages of both chromium and nickel. In addition, these alloys possess better creep strength than the straight chrome grades.

Specifications

ASTM A276, ASTM A479, AMS5650, QQS763

Weldability

Satisfactory

Corrosion

Resistance Annealed. Because of the higher chromium and nickel contents, the corrosion resistance of these grades is slightly better than that of Stainless Type 304.

These alloys have better corrosion resistance than Type 304 in hot petroleum products. Types 309 also has higher resistance to sulfite liquors in paper and paper pulp mills and are useful for handling nitric acid, nitric sulfuric acid mixtures, acetic, citric and lactic acids. If exposed to the temperature range of 800° / 1500° F (427° to 816° C).

310 Stainless Bar

Product Description

Type 310 is an austenitic chromium-nickel stainless steel that has excellent oxidation resistance. These alloys have resisted temperatures up to 2100° F (1149° C) in continuous service, and have provided good resistance to both carburizing and reducing environments. Type 310 offers better corrosion resistance than Type 304 because of the higher percentages of chromium and nickel. Stainless Type 310 possesses much better creep strength at elevated temperatures than do the straight chrome grades.

Specifications

ASTM A276, ASTM A479, AMS5651, QQ-S-763

Weldability

Satisfactory

Corrosion

Type 310 has excellent corrosion resistance and is superior to Stainless Type 304 and Type 309 in many environments.

Marine exposures have produced little to no evidence of stress corrosion for annealed or cold-rolled Types 310 up to 90% of it's yield strength.

These alloys have excellent resistance to oxidizing acids and common corrosion agents. They also have good resistance to molten salts, such as drawing and tempering salts, neutral salts, cyaniding salts and high-speed salts. If exposed to the temperature range of 800/1500° F (427/816°), Type 310S is suggested for better corrosion resistance.

Type 316 / 316L / 316L ESR / 316 VAR Stainless Bar

Product Description

Chromium-nickel stainless steel with molybdenum added to increase corrosion resistance and mechanical properties at elevated temperatures. Non-magnetic in the annealed condition and not hardenable by heat treatment. The 316L grade (low carbon) precludes any harmful precipitation in the 800° F - 1500° F range that might result from welding heavier sections.

Specifications

ASTM A276, ASTM A479, AMS 5648, QQ-S-763

Weldability

Excellent. Annealing after welding recommended for maximum corrosion resistance.

Corrosion Resistance

Type 316 is more resistant to atmospheric and general corrosive conditions than any of the other standard stainless steels. They have good resistance to the corrosive effects of sulfates, phosphates, and other salts as well as reducing acids such as sulfuric, sulfurous, and phosphoric. These grades are less susceptible to pitting on applications where acetic acid vapors or solutions of chlorides, bromides, or iodides are encountered. If heated to the range of 800° - 1500° F or cooled slowly through this range, the low-carbon version (316L) should be selected to avoid intergranular corrosion.

321 Stainless Bar

Product Description

Chromium-nickel stainless steel with titanium added to control intergranular corrosion in the 800°F - 1500° F range. Non-magnetic in the annealed condition and not hardenable by heat treatment.

Specifications

ASTM A276, ASTM A314, ASTM A479, AMS 5645, QQ-S-763

Weldability

Excellent

Corrosion Resistance

Resistant to intergranular corrosion. General corrosion resistance somewhat less than Type 304. Tends to form a light rust film in corrosive atmospheres, but this rusting is not progressive. Can be heated to or cooled slowly through the 800° F - 1500° F range without intergranular corrosion.

347 Stainless Bar

Product Description

Chromium-nickel stainless steel with columbium and tantalum added to avoid intergranular corrosion in the 800°F - 1500° F range. It is non-magnetic in the annealed condition, and is not hardenable by heat treatment.

Specifications

ASTM A276, ASTM A314, ASTM A479, AMS 5646, QQ-S-763

Weldability

Excellent

Corrosion Resistance

Resistance to intergranular corrosion when heated to, or cooled slowly through, the 800° F - 1500° F range. General corrosion resistance same as Type 304.

15-5 / 15-5 VAR Stainless Bar

Product Description

15-5 has all the advantages of 17-4, including single low-temperature thermal treatment. It also offers excellent transverse notch toughness and ductility, better mechanical properties in larger sections, and better forgeability. 15-5 PH VAR is produced as a consumable electrode, vacuum arc remelted product with essentially ferrite-free microstructure.

Specifications

AMS 5659

Weldability

Excellent.

Corrosion Resistance

The corrosion resistance of 15-5 is superior to straight chromium grades like Type 410, and approaches that of the chromium-nickel grades. It is equal to 304 in many corrosive media. The corrosion resistant properties hold up in service and temperatures up to 800? F.

17-4 / 17-4 H1150 Stainless Bar

Product Description

Chromium-nickel grade of stainless steel. May be hardened by single low-temperature heat treatment, yielding excellent mechanical properties at a high-strength level, and minimizing scaling and distortion. This grade should not be used in the solution-treated condition.

Specifications

ASTM A564 Type 630, AMS 5643

Weldability

Excellent.

Corrosion Resistance

The corrosion resistance of 17-4 is superior to straight chromium grades like Type 410, and approaches that of the chromium-nickel grades. It is equal to 304 in many corrosive media. The corrosion-resistant properties hold up in service and temperatures up to 800° F

410Stainless Bar

Product Description

Basic chromium grade of stainless steel. This is a heat treatable stainless steel. It is magnetic in all conditions.

Specifications

QQ-S-763, ASTM A276, ASTM A479, AMS5612, AMS 5613

Weldability

Good. Large sections should be preheated prior to welding. Due to air hardening properties, annealing after welding is recommended to obtain maximum ductility and toughness.

Corrosion Resistance

This material is resistant to corrosion from the atmosphere, fresh water, iron-bearing mine waters, food acids, neutral and basic salts, mild acids and alkalis. Maximum corrosion resistance of this grade is obtained by hardening and polishing. Resists oxidation up to 1000°F.

Type 416 Stainless Bar

Product Description

Chromium grade of stainless steel with phosphorus and sulfur added to improve machinability. Most readily machinable of the stainless grades. It is magnetic in all conditions and capable of wide range of mechanical properties by heat treating.

Specifications

ASTM A314, ASTM A582, AMS 5610

Weldability

Poor

Corrosion Resistance

Corrosion resistance is similar to Type 410, and is resistant to atmosphere, fresh water, food acids, and neutral and basic salts. Maximum corrosion resistance of this grade is obtained by hardening and polishing.

416 Heat Treated Stainless Bar

Product Description

Chromium grade of stainless steel with phosphorus and sulfur added to improve machinability. Most readily machinable of the stainless grades. It is magnetic in all conditions and capable of wide range of mechanical properties by heat treating.

Specifications

ASTM A314, ASTM A582, AMS 5610

Weldability

Poor

Corrosion Resistance

Corrosion resistance is similar to Type 410, and is resistant to atmosphere, fresh water, food acids, and neutral and basic salts. Maximum corrosion resistance of this grade is obtained by hardening and polishing.

440C Stainless Bar

Product Description

High-carbon, chromium stainless steel capable of developing the highest hardness and mechanical properties of all the stainless steels. It is magnetic in all conditions.

Specifications

ASTM A276, ASTM A580, AMS 5630, QQ-S-763

Weldability

Poor.

Corrosion Resistance

Type 440C resists corrosion from fresh-water stream, crude oil, gasoline, etc., and resists staining from fruit and food acids. Maximum resistance is obtained by hardening and polishing.

Amerimelt®

Amerimelt®

AMERIMELT® is a free machining domestically produced stainless bar product. Amerimelt's chemistry is controlled for ease of machineability and consistency from lot to lot. Exclusively from EMPIRE METAL SUPPLY, Amerimelt is available in 303, 304/304L, 316/316L and 416.

Pluszero®

Plus Zero®

Sometimes standard stainless diameters just don't work. When you want your bearing to slide. When you want your bushing to fit. When you are looking for high production bar feed. When you are looking for ground and polished bars. Introducing...

Plus Zero®

A new stainless steel product, available as a stock item in 303, 304/304L, 316/316L and 17-4